The Flute Laminating Machine is trying to find working conditions for faster and better assembly at high temperature
The Flute Laminating Machine is trying to find faster and better working conditions at high temperature desorption assembly. In this scheme, the four-way electric v350 inverter is used to control the motor speed. Printing control composite material through the process of the guide roll back into the printing unit, back in the printing process through a series of the processor, traction traction roll under application spread from printing unit output into the next procedure.
The Flute Laminating Machine is used in the Flute Laminating Machine as binder, without glue. Improve the smoothness of the product, improve the adhesion of products, and occupy less land. The machine adopts variable frequency synchronization control to realize the simultaneous work of compound main drying drum and composite rewinding, which is more convenient. The melting of the flame by flame is especially applicable to the adhesion of plush and deerskin velvet. It has the characteristics of environmental protection, good hand feeling and water washing.
The heating system of the Flute Laminating Machine is divided into two groups. The user can select the heating mode (one or two groups) according to the requirements, which can effectively save energy and reduce the production cost. Used in Flute Laminating Machine as binder, no glue. The melting of the flame by flame is especially applicable to the adhesion of plush and deerskin velvet. It has the characteristics of environmental protection, good hand feeling and water washing.
The compound device of flute composite is composed of double inner threaded heating compound roller, auxiliary preheating roller, cooling roller and main drive system. AC motor drive, variable frequency closed-loop vector control (work process tension automatic detection, display); The passive guide roller all USES hard aluminum tube, imported high quality material and anodized hardness HV300.
Flute Laminating Machine is used for composite fabrics and fabrics composite, composite processing can be fabric and composite fabric, can be a fabric with foam compound, also can be leather and fabric composite, the specific way of the combination of the composite is according to the specific needs of customers.
The Flute Laminating Machine is used in non-woven materials such as adhesive composite (bonding) and cutting and processing. It is suitable for the processing of household air purifier, automobile air purifier, air conditioner, refrigerator etc.
The Flute Laminating Machine plays an important role in our industrial production, and in the process of the rapid development of our productivity, our equipment USES higher and higher performance. The net band flute composite is suitable for rubber, cloth, EVA, human leather and non-woven fabric.
Flute Laminating Machine needs to be plastic or material uniform ink adhesion on surface of aluminum foil, plastic film or textile fabric, the coating technology demand is higher, not only requires highly uniform coated and must be able to achieve high-speed non-stop change volume in order to improve production efficiency.
The Flute Laminating Machine is used for ink and reel printing system, with high speed, high speed of gravure plate and high cost, suitable for mass label production. Using gravure printing press, the label of the adhesive label is fine, the layers are rich, the film labels are mostly rolled to the volume printing, and need volatile dry ink. Offset printing of thick plastic materials suitable for mass printing.
The cold adhesion of flute composite is mainly applied to external pressure, so that the bonding diaphragm is combined by pressure sensitive adhesive. Cold bonding is mainly suitable for the bonding of heat-sensitive materials. For example, some inkjet printers will melt when heated, and printers will be used to print heat sensitive paper. In these cases, using a cold patch is the best option. In the following case, it is more suitable for cold bonding: single side fitting, if you only wish to add adhesives on the back of the document, you can use the cold patch.