QZ Bottom Folding Type Corrugated Carton Folder Gluer
Production line features
A Feeding part:
● Accurate vacuum suction feeding
● Imported belt from Holland Aimala with fast connector, durable and easy to change
● PLC programming control, input paperboard size, and automatically adjusts in place
B Gluing part
● Imported diaphragm pump, durable in use
● Ordinary glue reduces production cost
● The max width of the gluing wheel: 40mm.
C Folding part
● Accurate folding along the crease line
● 90 degree correction (squaring) structure eliminate fishtail
● down folding.
D Counting & Ejecting part
●Long time for flapping enhances glue precision
●Accurate and stable counting and ejecting structure
●Re- flapping structure (secondary alignment) eliminates fishtail thoroughly
Main Technical specification
3~5 ply corrugated cardboard A/B/C/AB/AC
Min 260 x 680mm
Min 260 x 720mm
13.6 x 4.2 x 2.3m
5,10,15,20,25,30 or other
5,10,15,20,25,30, or other
380V 3 phases 50Hz
380V 3 phases 50Hz
Pressure less then 0.8 Mpa, air demand not less than 0.3 m³ / min
Pressure 0.7-0.9 Mpa, air demand not less than 0.5 m³ / min
1.Control mode: PLC
2.Speed adjusting system: VFD speed adjusting.
3.Order memory: 500sets
4.Max delivery capacity (the delivery capacity must be larger than the process capacity of the whole machine):
1)Paper size C: not over 450mm
10 sheets／bundle 18bundle／min 180 sheets／min
20 sheets／bundle 12bundle／min 240 sheets／min
25 sheets／bundle 10bundle／min 250 sheets／min
2)Paper size C: 451 - 600mm
10 sheets／bundle 16bundle／min 160 sheets／min
20 sheets／bundle 9bundle／min 180 sheets／min
3)Paper size C: 601 - 800mm
10 sheets／bundle 12bundle／min 120 sheets／min
4)Paper size C: over 800mm
10 sheets／bundle 9bundle／min 90 sheets／min
5.Environment: ０℃～+４０℃, dampness: ３０％～９０％RH (without frost).
6.Machine noise: normally, switch on all fans, max 80-85dB (have relations to the surroundings).
Folder gluer Key parts
Haoxin (Taiwan, China)
Ingersoll Rand (America)
Wannan (Anhui, China)
Quanfeng (Taiwan, China)
ABBA (Taiwan, China), (Luoyang, China)
electric- sensors, encoder
A5 Automatic strapping machine
Size: 1250mm (width) x 500mm (pile height)
The strapping machine consists of automatic clapping, automatic strapping, automatic turning, and delivery table, etc.
1. Based on German core technology.
2. Most advanced high speed automatic strap threading technology.
3. Quickest automatic strap coil change technology.
4. Fastest strapping machine (of the same type).
5. Automatic strap end detection with ejection of remaining strap
6. Automatic strap loop ejection when machine cycles without bundle
7. Thermostatically controlled 24 volt heat-weld sealing system; Wear-free DC drive, brushless motor technology
8. PLC control; Equipment control system upgrade effects with the use of belt conveyor stack carton boxes, conveyor speed can be adjustable
9. 7 inches touch screen control system, and automatic fault alarming for the position.
10. Strapping tension can be adjustable with digital input; can select single strapping or double strapping
11. Quickly set up the operating methods, strapping positions, strapping tension, etc.
l Hot welding system with electric temperature adjusting device.
l Fastening welding point, special cam deivce.
Adopting Germany brand.
Air pressure device
Adopting Taiwan brand.
6 bar compressed air, 1/4” fast moving clutch; air consumption 25 cycles / min: ca. 130 l / min
Rollers delivery section
Adopting Japan brand motor.
And the delivering speed can be adjusted.
Automatic detecting sensor
Adopting Japan Omron.
Automatic detecting the cartons, and the position is adjusted
PLC control system
And can extend from single strapping function to multi-function.
Touch screen control system
Adopting Taiwan brand
Multi- function control, can choose single strapping, or double strapping. Can also choose manually strapping, or automatic strapping, also can choose air pressure switch, etc.
The total length of the strapping machine: 4500mm
Working table height: 820-930mm adjustable
Max 18-20 bundles, depending on the carton sizes.
Standard PP strapping strip, width 5mm.
Carton ordering device: can clap cartons in four directions.
1.Carton size: width 300-1000mm (the width in the ordering position), length 300-1000mm, height 120-350mm.
2.Can do three direction clapping (front, left and right), and four direction clapping (front, rear, left and right).
3.The block rod cylinder journey: 250mm, and the cylinder extending, it is 350mm higher than the delivery line.
4.Delivery speed: 15-25m adjustable.
5.Max pile height: 15-20kg.
6.Clapping rhythm: 18-22 average
If the high-end qz series high speed automatic corrugated carton folder gluer with automatic bundling caters to your requirement, welcome to buy the quality products for sale with us. We're one of the professional manufacturers in China, and we will offer you unmatched prices and service.